Call us: (302) 907-2662 Email : info@moparpartsdealers.com
Mopar 4792838AB Water Pump
$202.98
- Part Description
Pump-Water
- Replaced By
- Replaces
- Manufacturer
Mopar
-
Product Specifications
Brand Genuine Mopar Manufacturer Part Number 4792838AB Part Description Pump-Water Other Names Water Pump Assembly Item Dimensions 14.3 x 11.6 x 5.3 inches Item Weight 7.70 Pounds Condition New Fitment Type Direct Replacement Replaces 4792838AA Manufacturer Mopar SKU 4792838AB Warranty This genuine Mopar part is guaranteed by Mopar’s factory warranty. Shipping & Return Shipping Policy Return Policy Warning: California’s Proposition 65 -
Vehicle Fitment
Year Make Model Engine Important vehicle option details 2008-2010, 2006 Chrysler 300 8 Cyl 5.7L, 8 Cyl 6.1L C AWD, C RWD, C SRT8 RWD, Touring RWD 2008-2010 Dodge Challenger 8 Cyl 6.1L R/T, SRT8 2008-2010, 2006 Dodge Charger 8 Cyl 5.7L, 8 Cyl 6.1L Base RWD, R/T AWD, R/T RWD, SRT8 RWD 2006 Dodge Magnum 8 Cyl 5.7L R/T AWD, R/T RWD, SE RWD 2008 Jeep Commander 8 Cyl 5.7L Limited 2WD, Limited 4WD, Overland 2WD, Overland 4WD, Sport 2WD, Sport 4WD 2008-2010, 2006 Jeep Grand Cherokee 8 Cyl 5.7L, 8 Cyl 6.1L Laredo 2WD, Laredo 4WD, Limited 2WD, Limited 4WD, Overland 2WD, Overland 4WD, SRT8 4WD -
Customer Questions & Expert Answers
- Q:
Is this part guaranteed to fit my truck ?Posted by moparpartsdealers Specialist
- A:
You can Select Your Vehicle to check if 4792838AB fits your vehicle.
Posted by moparpartsdealers Specialist
- Q:
How to Replace a Water Pump on a Dodge Charger?Posted by Customer
- A:
Disconnect the cable from the negative battery terminal. Drain the cooling system and save the coolant if it is in good condition. Remove the engine cooling fan assembly. Remove the drivebelt. For 2.7L V6 engines, remove the timing chain and guides. For 3.5L V6 engines, remove the timing belt. For 5.7L VS engines, remove the thermostat. Detach the radiator hose from the water pump and remove the idler pulley for the drivebelt. Remove the water pump from the engine, noting the locations of the bolts. Clean the bolt threads and threaded holes. Compare the new pump to the old one and check the impeller blades for corrosion. Remove old gasket material or O-ring seal. Clean the mating surfaces with lacquer thinner or acetone. Apply RTV sealant to the new water pump O-ring or gasket. Attach the pump to the engine and tighten the bolts in a criss-cross pattern. Connect the hoses and reinstall all removed parts. Refill the cooling system, run the engine, and check for leaks.
Posted by moparpartsdealers Specialist
- Q:
What should be checked if coolant is leaking from the back side for the 2008 Chrysler 300?Posted by Customer
- A:
On 2.7L V6 engine models, a failed seal may direct fluid to the “valley” of the motor and eventually leak out the back side of the engine. In this case, suspect water pump failure before other major engine leaks first.
Posted by moparpartsdealers Specialist
- See expert answers on similar Water Pump
- Q:
How do you disconnect the cable from the negative battery terminal for the 2006 Chrysler 300?Posted by Customer
- A:
Disconnect the cable from the negative battery terminal.
Posted by moparpartsdealers Specialist
- Q:
What should be checked if coolant is leaking from the back side for the 2006 Dodge Charger?Posted by Customer
- A:
On 2.7L V6 engine models, a failed seal may direct fluid to the “valley” of the motor and eventually leak out the back side of the engine. In this case, suspect water pump failure before other major engine leaks first.
Posted by moparpartsdealers Specialist
- See expert answers on similar Water Pump
- Q:
Where is the water pump located for the 2005 Dodge Magnum?Posted by Customer
- A:
On V6 engines, the water pump is driven by a timing belt or chain and is located at the front of the engine, but covered.
Posted by moparpartsdealers Specialist
- See expert answers on similar Water Pump
- Q:
What do you need to do to remove the drivebelt for the 2011 Dodge Challenger?Posted by Customer
- A:
Remove the drivebelt.
Posted by moparpartsdealers Specialist
- See expert answers on similar Water Pump
- Q:
How do you remove the engine cooling fan assembly for the 2006 Dodge Magnum?Posted by Customer
- A:
Remove the engine cooling fan assembly.
Posted by moparpartsdealers Specialist
If you have any questions about this product, please don’t hesitate to ask us. We will be happy to help you! - Q:
Genuine Mopar Part 4792838AB, the Right Choice
To ensure reliability, purchase Mopar part # 4792838AB Water Pump. It is sometimes referred to as Mopar Water Pump. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 300 models. It fits Dodge Challenger, Charger, Magnum. It also fits Jeep Commander, Grand Cherokee.
moparpartsdealers .com is a leading supplier of genuine Mopar parts and accessories such as Mopar 4792838AB Water Pump. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What’s more, all parts come with a manufacturer’s warranty. For detailed Jeep parts information, click here.
Why choose moparpartsdealers
-
Dedicated Service
Your complete satisfaction is our #1 goal
-
Lowest Prices
Best deals on genuine OE parts from dealerships
-
Fast Delivery
Be the first to review “Mopar 4792838AB Water Pump”
Related products
-
Mopar 68273308AA Engine Cooling Radiator
$534.69 -
Mopar 52014722AD Hose-Radiator Inlet
$111.01 -
Mopar 53022192AJ Water Pump
$169.20 -
Mopar 68346915AA Water Pump
$122.87
Reviews
There are no reviews yet.